Knife Support for Pressing Beam 56/66/80
Product information "Knife Support for Pressing Beam 56/66/80"
The complete set knife support for pressing beam is usable for machine types 56/66/80.
The set contains the following components:
• 2x knife support
• 4x Distance foil 0.1 mm
• 4x Distance foil 0.05 mm
• 4x Countersunk screw
Weiteres Zubehör
Knife HSS 78/80
€308.21*
€436.73*
(29.43% saved)
HSS knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no.6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101.
Technical details: No. of holes: 18 | Quantity of hole lines: 2 | Maximum grind off/mm: 25 | Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knife HSS 66
€224.91*
€286.20*
(21.42% saved)
HSS knives 66 can be used for cutters POLAR 66 and MOHR 66 as from machine no. 660H111
Technical details: No. of holes: 14 Quantity of hole lines: 2 Maximum grind off/mm: 22 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
Knife HSS 56
€201.11*
€255.85*
(21.4% saved)
HSS knives can be used for POLAR 56 and MOHR 56 cutters as from machine no. 8251001
Technical Details: No. of holes: 12 Quantity of hole lines: 2 Maximum grind off/mm: 22 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.