226048 SWIVELING PEDESTAL For fixing pneumatic cylinders Used in Joggers
Please see group 30.02 in the spare parts catalogue Used in Joggers RAH
Please see group 20.02 in the spare parts catalogue Used in Grippersystems
Please see group 50.20 in the spare parts catalogue
33991 Supporting cam
Used in Polar Cutting machine models 78 and 92.
Please see group 10.03. in the spare parts catalogue.
Important note!
Please always compare with the corresponding
spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized
service technician.
Part number Description
246592 ADJUSTING CAM
Used in Polar Cutting machine models 76 -155 EM / EMC
/ EM/EMC MON / SD /SD-P from year of construction 1982 until 1994. Please see
group 10.50. in the spare parts catalogue.
Usable from Serial number:
52xxxxx until 64xxxxx
Important note!
Please always compare with the corresponding
spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized
service technician.
59882 Adjustment gear komplete
Usable for POLAR 115-176 Models at the knife bar, knife change version new from front site / Optiknife
Replacement for 44924, 256696, 406237
Please see group 10.03 in the spare parts catalogue.
The Adjustment gear complete consist out of following single parts: 58593 Adjustment gear 1 pc 443636 Support plate 1 pc 202297 Lentel screw 1 pc 445991 Guiding Ledge 2 pc 201566 Cylindric screw 6 pc 220951 Washer 6 pc 445992 Cover knife lift 1 pc 203414 Cylindric screw 4 pc202843 Cup Spring 2 pc 22332 Brake disc 1 pc
206181 Air distributer
Used in all Polar Cutting machine models 78 until 176
Please see group table / table air tubing 20.00 in the
spare parts catalogue.
Important note!
Please always compare with the corresponding
spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized
service technician.
45196 Ausgleichsleiste komplett Ausgleichsleiste wird benötigt wenn max. Abschliff des Messers erreicht wurde. Bitte die Messerwechsel Version / Ausführung beachten!
Nur für HSS Messer nicht für Hartmetallmesser verwendbar
bestehend aus:
1 Stück 274865 Ausgleichsleiste
2 Stück 201889 Zylinderschraube
2 Stück 270239 O-Ring
Siehe Gruppe 10.03 im Ersatzteilkatalog
99900231 Bracket cpl. The bracket complete consist out of following single parts: 36424 Bracket cpl. 1 Piece 233801 Plain bearing 2 Pieces Used in all Polar Cutting machines model 76,78 – 176 start year of construction 1987 until actual serials. Please see in group 10.37. In the spare parts catalogue
99900480 Brake (43880) + additional hub The repair kit consist out of following parts: 1 piece Brake part number 43880
(consist out of magnetic unit, Rotor, Hub, friction lining shim and fastening – cylindric screws) 1 piece additional Hub for Motor shafts with 14,00 mm diameter
part number 470812 Usable for POLAR 78 until 176 Models start E / ED, X / XT to actual serial N
Please see group 20.04 in the spare parts catalogue.
Important note!
Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized service technician.
27601 Complete kit Damping at the lever This complete kit is usable for all Polar Cutters models 115 – 176 start year of construction 1987 until actual serial and consist out of following single parts: 259257 Dampingstrip 1 piece 259258 Plastic ledge 1 piece 259430 Distance sleeve 3 pieces 201980 Lentel screw 3 pieces The single part numbers are to find in the spare parts catalogue group 10.37.
27644 Complete kit Damping at the lever This complete kit is usable for all Polar Cutters models 76 - 92 start year of construction 1987 until actual serial and consist out of following single parts: 259428 Dampingstrip 1 piece 259429 Plastic ledge 1 piece 259430 Distance sleeve 2 pieces 201980 Lentel screw 2 pieces The single part numbers are to find in the spare parts catalogue group 10.37.
270789 Control Cam Usable in all Polar Models 78-176 start EM - EMC/ E/ED / X/XT N until actual serials . See group 10.05. in the spare parts catalogue
50066 Control valve
Used in Polar Cutting machine models 78 until 176. Please
see group 20.00. in the spare parts catalogue.
Control voltage 24 V =
Important note!
Please always compare with the corresponding
spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized
service technician.
Conversion Kit gliderThe glider conversion kit is required to replace the gliders on the stop ruler group 40.10 of Transomat unloaders TR 130 / TR160 and includes the following parts: 417438 Glider (injection molding) 10 Stück 416493 Pressure spring 20 Stück 201889 Cylindric screw 20 Stück 417703 Mounting Drawing TR803 Form.4+5 1 Stück
419600 Cilindric pin 20 Stück 425634 Glider 8 StückPlease check in the parts catalogue of the mentioned machine
203535 COUNTERSUNK SCREW, POLYAMIDUsed in POLAR Cutting machine models 76 until 176 to fix the knife support at the clamp. Please see group 10.04. in the spare parts catalogue.
Replacement for Countersunk screw 202285
Important note!
Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized service technician.
Used in Polar Cutting machine models 115 EM, EMCII,
SD-P, EM MON, EMC MON.
Please see group 20.22 in the spare parts catalogue.
Usable from Serial number:
5531800
bis 6431750 Year of construction 1985 –
1994
Important note!
Please always compare with the corresponding
spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized
service technician.
Cover Band 92
Coverband at the rear table parts group in the parts catalogue 092- 20.22
Usable for Polar 92 Models EM /EMC / SD / SDP
start machine number: 5511300 until year of construction 1994 Important note!
Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders!
Parts should always be replaced by an authorized service technician.
33959 Cover Band cpl. Cover Band at the rear table parts group in the parts catalogue 137- 20.22Usable for all 137 Models E / X / N
start machine number: 6404101 until actual N serial models
33961 Cover Band cpl. Cover Band at the rear table parts group in the parts catalogue 115- 20.22 Usable for all 115 Models E / X / N
start machine number: 6403101 until actual N serial models
18317 Cover Band cpl. 76 Coverband at the rear table parts group in the parts catalogue 076- 20.22Usable for all POLAR 76 Models EM / SD / SDP start machine number: 5206001 until year of construction 1994
33637 Cover Band cpl.
Coverband at the rear table parts group in the parts catalogue 078- 20.22
usable for all 78 Models E / X / N
start machine number: 6406101 until actual N serial models
33956 Cover Band cpl. Cover Band at the rear table parts group in the parts catalogue 092- 20.22
usable for all 92 Models E / X / N Start machine number: 6401101 until actual N serial models
€173.92*
This website uses cookies to ensure the best experience possible. More information...
