Carbide tipped knives AC25 can be used for POLAR Autocut 25.
Technical details:
Strenght: 7.75 cm Maximum grind off/mm: 18 mm Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives AC 25 can be used for POLAR Autocut 25.
Technical details:
Strenght: 9.75 cm Maximum grind off/mm: 18mm Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide-tipped machine knife 55 can be used for all POLAR cutters machine type 55.
Delivery incl. wooden knife box.
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 56 can be used for Cutters POLAR 56 and MOHR 56 as from machine no. 8251001.
Technical Details: No. of holes: 12 Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 58 can be used for Cutters POLAR 58 and MOHR 58 as from machine no. 5951301 to 6651130.
Technical details:
No. of holes: 12Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 66 can be used for Cutters POLAR 66 and MOHR 66 as from machine no. 660H111.
Technical details: No. of holes: 14 Quantity of hole lines: 2 Maximum grind off/mm: 15Main knife angle: 23°
Knife angles for carbide tipped knives: 21°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 72 can be used for High Speed Cutters POLAR 72 from machine no. 4351551 to 5451200.
Technical Details: No. of holes: 12 Quantitiy of hole lines: 2 Maximum grind off/mm: 15 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 76 can be used for High Speed Cutters POLAR 76 from machine no. 5206001 to 6561161.
Technical details: No. of holes: 14 Quantity of hole lines: 2 Maximum grind off/mm: 15 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no. 6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101.
Technical Details: No. of holes: 18 Quantity of hole lines: 2 Maximum grind off/mm: 15 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 4711001.
Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 15 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
Carbide tipped knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 6011601.
Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 15 Main knife angle: 23°
Delivery incl. wooden knife case
Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.
The distance ledge is required when the maximum grinding of the knife has been achieved. Important: Please attention to the knife changing system of your machine! The distance ledge is only usable for HSS knives and not usable for carbide tipped knives.
HSS knives can be used for POLAR 56 and MOHR 56 cutters as from machine no. 8251001
Technical Details: No. of holes: 12 Quantity of hole lines: 2 Maximum grind off/mm: 22 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 58 can be used for High Speed Paper Cutters POLAR 76 from machine no. 5951301 to 6651130.
Technical details: No. of holes: 12 Quantity of holes lines: 2 Maximim grind off/mm: 22 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 66 can be used for cutters POLAR 66 and MOHR 66 as from machine no. 660H111
Technical details: No. of holes: 14 Quantity of hole lines: 2 Maximum grind off/mm: 22 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 72 can be used for High Speed Cutters POLAR 72 from machine no. 4351551 to 5441200.
Technical details: No.of holes: 12 Quantity of hole lines: 2 Maximum grind off/mm: 25 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 76 can be used for High Speed Paper Cutters POLAR 76 from machine no. 5206001 to 6561161.
Technical details: No. of holes: 14 Quantity of holes lines: 2 Maximim grind off/mm: 25 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no.6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101.
Technical details: No. of holes: 18 | Quantity of hole lines: 2 | Maximum grind off/mm: 25 | Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
HSS knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 6011601
Please note that the knife is intended for the new knife change (OptiKnife from the front)!
Technical details: No. of holes: 22 Quantity of hole lines: 2 Maximum grind off/mm: 30 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 4711001
Please note that the knife is intended for the old knife change (Pleuel adjustment)!
Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 30 Knife angles for HSS knives: 24°
Delivery incl. wooden knife case.
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
HSS knives 55 can be used for all cutters POLAR 55
Technical details: No. of holes: 14 Quantity of holes lines: 2 Maximim grind off/mm: 22 Knife angles for HSS knives: 24°Delivery incl. wooden knife case
Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.
Carbide tipped premium knives 56 can be used for Cutters POLAR 56 and MOHR 56 as from machine no. 8251001
Technical details: No. of holes: 12 Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23°
Delivery incl. wooden knife case
Premium carbide-tipped (hard metal) knives are an in-house development of POLAR based on many years of cutting experience. They are especially suitable for materials in the area web-to-print and labels.
Carbide tipped premium knives 66 can be used for Cutters POLAR 66 and MOHR 66 as from machine no. 660H111
Technical details: No. of holes: 14 Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23°
Delivery incl. wooden knife case
Premium carbide-tipped (hard metal) knives are an in-house development of POLAR based on many years of cutting experience. They are especially suitable for materials in the area web-to-print and labels.
Carbide tipped premium knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no. 6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101.
Technical details: No. of holes: 18 Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23°
Delivery incl. wooden knife case
Premium carbide-tipped (hard metal) knives are an in-house development of POLAR based on many years of cutting experience. They are especially suitable for materials in the area web-to-print and labels.
€1,426.81*
€1,840.93*(22.5% saved)
This website uses cookies to ensure the best experience possible. More information...
