Knife screw 78/80 (pack of 5, 25569)

€73.30*

Content: 5 Stück (€14.66* / 1 Stück)

No longer available

Product number: 73691
Product information "Knife screw 78/80 (pack of 5, 25569)"

Original POLAR knife screws, no longer available! See information below.

Machine type: High-speed cutter POLAR 78/ Cutter POLAR 80/ MOHR 80

Knife screw ID 25569 is no longer available and is replaced by ID 73464. For initial order please select "Modification Set 078 for knife screws" (Art.No.) 76115 (set of 10 screws). Screw included in modification kit (ID 73464) replaces knife screw ID. 25569.

Weiteres Zubehör

Carbide-tipped knife 92 (270672)
Carbide tipped knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 6011601. Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 15 Main knife angle: 23° Delivery incl. wooden knife case Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.  

€1,452.99*
Carbide-tipped knife 92 (222752)
Carbide tipped knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 4711001. Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 15 Main knife angle: 23° Delivery incl. wooden knife case Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.

€1,452.45*
Knife HSS 78/80
HSS knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no.6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101. Technical details: No. of holes: 18 | Quantity of hole lines: 2 | Maximum grind off/mm: 25 | Knife angles for HSS knives: 24° Delivery incl. wooden knife case  

€436.73*
Knife HSS 92 (OptiKnife Change, 446283)
HSS knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 6011601  Please note that the knife is intended for the new knife change (OptiKnife from the front)! Technical details: No. of holes: 22 Quantity of hole lines: 2 Maximum grind off/mm: 30 Knife angles for HSS knives: 24° Delivery incl. wooden knife case Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.

€456.96*
Knife HSS 92 (Pleuel adjustment, 245184)
HSS knives 92 can be used for High Speed Cutters POLAR 92 as from machine no. 4711001  Please note that the knife is intended for the old knife change (Pleuel adjustment)! Technical details: No. of holes: 11 Quantity of hole lines: 1 Maximum grind off/mm: 30 Knife angles for HSS knives: 24°  Delivery incl. wooden knife case. Knives made of high-powered high-speed steel with 18% of tungsten are showing impressive service lives and good value for money. They are highly flexible in use and thus suitable especially for hard material with foreign particles, e.g. chip board and recycling materials.

€456.96*
Premium carbide-tipped knife 78/80
Carbide tipped premium knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no. 6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101. Technical details: No. of holes: 18 Quantity of hole lines: 2 Maximum grind off/mm: 18 Main knife angle: 23° Delivery incl. wooden knife case Premium carbide-tipped (hard metal) knives are an in-house development of POLAR based on many years of cutting experience. They are especially suitable for materials in the area web-to-print and labels.

€1,840.93*
Carbide-tipped knife 78/80
Carbide tipped knives 78/80 can be used for High Speed Cutters POLAR 78 as from machine no. 6406101 + Cutters POLAR 80 and MOHR 80 as from machine no.76N1101. Technical Details: No. of holes: 18 Quantity of hole lines: 2 Maximum grind off/mm: 15 Main knife angle: 23° Delivery incl. wooden knife case Carbide-tipped (hard metal) knives consist of sintered metal tungsten carbide. Compared to other knives they are characterized by a special finest-grain quality. These knives are extremely suitable for pure materials which contain no foreign particles. They offer high cutting precision and a considerably longer service life, which helps you to reduce grinding cost and to increase production in the long run.

€1,281.63*