Buy original POLAR accessories online

Exchange kit hydraulic pump (230107)

73308 Exchange kit hydraulic pump (230107) The exchange kit for the hydraulic pump (230107) is usable for the models 92 – 176 start E / ED and contains the following parts to change the hydraulic pump: 230107 Gear Pump 1 Piece 282000 Suction filter 1 Piece 200966 Gaket 6 Pieces 466372 Gasket 1 Piece 202509 Gasket 6 Pieces 230067 Gasket 1 Piece 232005 Gasket 1 Piece 230068 Distance washer 3 Piece 240788 Distance washer 3 Piece Please see group 10.01. in the spare parts catalogue. The exchange of the hydraulic pump must be made from an authorized Service Engineer!

€1,178.04*

Wear and Tear kit for POLAR 115 Models

67334 Wear and Tear kit for POLAR 115 Models The Wear and tear kit contains following components/ single parts 3 Shear bolt 73425 Shear Bolt kit (pack of 3, 423024) 14 Knife screws 76117 Modification Set 115 for knife screws ( 73645 ) 5 Air jets short 73694 Air jets short 78-176 (pack of 5, 22514) 5 Air jets long 73693 Air jets long 78-176 (pack of 5, 22513) 1 GEAR NO. 2 245004 2 Knife Support 73270 Knife Support for Pressing Beam 115-176 10 Cutting stick 275710 Universal cutting stick 115 - 10 pc. / pck.1 Side Gauge Left 4445321 Side Gauge right 437922 1 COVER BAND CPL. 339611 Cutting Button 64815 1 CABLE PROXIMITY SWITCH 50996 1 CONNECTING CABLE FOR SAFETY BOLT 40544 2 Limit switch 450328 2 Membrane screw M20 448535 4 MICRO-SWITCH V31-601 229320 2 MICRO-SWITCH V31-602 229321 The photos show the wear part set 115 for reference. The contents may differ from the photos.

€1,335.06*

Control valve

50066 Control valve Used in Polar Cutting machine models 78 until 176. Please see group 20.00. in the spare parts catalogue. Control voltage 24 V = Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€443.57*

Cutting button (27293)

27293 Cutting button (27293) Used in Polar Cutting machine models 92 until 155 SD / SD-P/ EM / EMC / EM MON / EMC MON. Please see group 20.00. in the spare parts catalogue. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€332.61*

MEASURING SYSTEM 115 EMC

022487 MEASURING SYSTEM 92 Used in Polar Cutting machine models 115 EM-EMC II und EM-EMC-MON. Please see group 20.00 /20.50 in the spare parts catalogue. Usable from Serial number: From 115 EM+EMC2 5103601 until 6431750 From 115 SDP 5232001 until 6431750From 115 MON 5531001 until 6431750 From 115 EM-MON 5731001 until 6431750When replacing the measuring system, we recommend also replacing the trailing cable with article number 20073. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€5,132.89*

Connecting cable for Safety bolt

Used in Polar Cutting machine models 78 bis 176 until year of construction 1997. Please see group 10.37. in the spare parts catalogue. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€258.23*

Table motor with cable

40320 Table motor with cable Used in Polar Cutting machine models Polar and Mohr models 56, 66 and 80. Please see group 20.01. in the spare parts catalogue. Replacement / complete number for the motor 437818 Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€301.40*

Exchange kit hydraulic pump (232671)

74403 Exchange kit hydraulic pump (232671)The exchange kit is useable for the models 78 start E / ED and contains the following parts to change the hydraulic pump. Please see group 10.01. in the spare parts catalogue. The Exchange kit hydraulic pump consist out of following single parts: 232671 Gear Pump 1 Piece 280060 Suction filter 1 Piece 200966 Gasket 4 Pieces 466373 Gasket 1 Piece 202509 Gasket 6 Pieces 200924 Gasket 6 Pieces 206640 Distance washer 3 Pieces 206641 Distance washer 3 Pieces Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€572.28*

Power module 40177 inclusive terminal cover

75563 Power module 40177 inc. terminal cover The power module 75563 consist out of following single parts: 40177 Power Module 230VAC,5V/4A/12V/3A 1 piece 478831 Terminal cover for power module 1 piece For universal use in various Polar and Mohr machines and peripheral devices, please compare in the spare parts catalog of the respective machine. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€92.23*

Spring power brake

017123 Spring power brake The Spring Power brake consist out of following single parts and is only as complete unit available: Brake solenoid part 1 piece Brake rotor 1 piece Brake anchor disk 1 piece Hub 1 piece Fastening Screws 3 pieces Used in Polar Cutting machine models 92 bis 176 EM / EMC / MON form year of construction 1982 until 1994. Please see group 20.04. in the spare parts catalogue. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€718.08*

Easy start up control

229651 Easy start up control Used in Polar Cutting machine models 92 E/ED, X/XT, N Please see group 10.07. in the spare parts catalogue. Usable from Serial number: 6511201 until actual serialImportant note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€768.75*

TRANSFORMATOR 78ES

250967 TRANSFORMATOR 78ES Used in Polar Cutting machine models 78 ES, 78XS, 78 ECO / PLUS Please see group 10.07. in the spare parts catalogue. Usable from Serial number: 6761851 until 9361101 Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€642.98*

Power module 478180 inc. terminal cover

75565 Power module 478180 inc. terminal cover The power module 75563 consist out of following single parts: 478180 Power Module 230VAC/24VDC/8,8A 1 piece 478181 Terminal cover for Power module 1 piece For universal use in various Polar and Mohr machines and peripheral devices, please compare in the spare parts catalog of the respective machine. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€86.62*

Power module 476124 inclusive terminal cover

75558 Power module 476124 inc. terminal cover The power module 75558 consist out of following single parts: 476124 Power Module 230VAC/24VDC/4,5A 1 piece 476128 Terminal cover for Power module 1 piece For universal use in various Polar and Mohr machines and peripheral devices, please compare in the spare parts catalog of the respective machine. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€56.98*

DC Motor with cable

73520 DC Motor with cable Used in POLAR Air Pallet Lifts LL - 600-K-3 und POLAR Air Pallet Lifts LL - 1000-K-6. Please see group 10.07. in the spare parts catalogue. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€406.63*

Replacement cable encoder table 78-176 X/XT

56825 Replacement cable encoder table 78-176 X/XT The part number 56825 Cable encoder table 78-176 X/XT consist out of following single parts: Part number Description 56263 Cable encoder table X-XT 1 piece 438612 Encoder table 1 piece 203523 Screw 1 piece 203670 Cylindric screw 1 piece Used in Polar Cutting machine models 78 until 176 X-XT start year of construction 2004. Please see group 20.50. in the spare parts catalogue. Usable as replacement for the table encoder 051027 Usable for following machine types and serial numbers: Typ von - bis M078 7306101 - 7661340 M092 7301101 - 7611230 M115 7303101 - 7631450 M137 7441001 - 7641130 M155 7421101 - 7621010 M176 74A1001 - 76A1005 Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€652.79*

Hand wheel for hand fine adjustment (17457)

17457 Hand wheel for hand fine adjustment Used in Polar Cutting machine models 55, 92 bis 155 SD / EM/ EMC II. Please see group 20.02.in the spare parts catalogue. Usable from Serial number: 092 SD+EM 5211001 092 EMCII 5211001 115 SD+EM 5231001 115 EMCII 5231001 137 SD+EM 5241001 137 EMCII 5241001 155 SD+EM 5221201 155 EMCII 5221201 55 EM+SDP 5405501 Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€36.89*

Blower T2

58360 Blower T2 Used in Polar Cutting machine models 56 until 137 Please see group 20.00 and 20.62in the spare parts catalogue. Used Jogger R / RA / RAH; Please see group 10.02 in the spare parts catalogue. Air pallet lift Please see group 10.07 in the spare parts catalogue. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€656.39*

Power module 473043 incl. terminal cover

75559 Power module 473043 incl. terminal cover The power module 75559 consist out of following single parts: 473043 Power Module 230VAC/+5 V/ +24VDC / 4,6A 1 piece 478831 Terminal cover for Power module 1 piece For universal use in various Polar and Mohr machines and peripheral devices, please compare in the spare parts catalog of the respective machine. Important note! Please always compare with the corresponding spare parts catalog of your machine before ordering to avoid incorrect orders! Parts should always be replaced by an authorized service technician.

€63.86*

The right accessories for every need

Do you have any questions or suggestions?
We look forward to hearing from you!

shop@mohr-postpress.com

The right accessories for every need

Do you have any questions or suggestions? We look forward to hearing from you!

shop@mohr-postpress.com

Do you have any questions or suggestions?
We look forward to hearing from you!